A stock count, whether it's a year-end count, a cycle count of one aisle, or a spot check, ends the same way in Brahmin Solutions: you record the difference between what you counted and what the system shows, dated the day you counted.
1. Get ready
Stop stock moving while you count if you can: finish shipping and receiving first, or count after hours. Anything that ships mid-count makes the comparison wrong.
Count by bin. Adjustments work bin by bin, so a count sheet with bin, item and quantity is the easiest to enter.
For lot items, count by lot and note the lot numbers.
2. Compare and work out the difference
For each item and bin, compare what you counted with On hand for that bin on the item's Inventory tab.
Compare against the stock at the time you counted. The difference you enter is applied to the stock as it is when you post. Enter the count before any stock moves again. If stock has shipped or been received since you counted, work out the difference against what was on hand at the count, not today's figure.
System shows | You counted | Enter |
12 | 11 | remove 1 |
40 | 44 | add 4 |
6 | 0 | remove 6, or click Adjust full quantity |
0 | 3 (bin isn't listed) | Add location, choose the bin, add 3 |
3. Enter the differences as one adjustment
In the top menu, click Inventory, then Inventory Movement, then Inventory Adjustment (New).
Add each item that's off, and enter its difference on the right bin. Use the + / − button for the direction. Items that matched don't need to go on the adjustment.
Set Adjustment date to the day you counted, for example your year-end date.
In Notes, say what it is, for example "Year-end count 2026". Searching History for that note later brings up the whole count.
Click Post adjustment, check the confirmation, and post.
For stock you're adding back, enter the cost you'd value it at. Leaving it at the current average cost (MAC) keeps the average unchanged.
4. Check the result
Open History, add the Search filter and type your note. Every line of the count should be there, with the right date.
Spot-check a few items' On hand against your sheet.
Click Export on History to keep a copy for your accountant.
Big counts
A large count is easier as several adjustments, one per aisle or area, each with the same note and date. They're easier to check, and a mistake on one doesn't hold up the rest.
There isn't a count import, so each difference is entered on screen.

